[Elecraft] Serial port woes with KIO3B

[ROBERT GARCEAU]

Are you using com port 10 on all applications?

Bob, W1EQ

Get Outlook for iOS<https://aka.ms/o0ukef>
________________________________
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> on behalf of Pete Smith N4ZR <pete.n4zr at gmail.com>
Sent: Tuesday, May 2, 2023 2:50:20 PM
To: Elecraft List <elecraft at mailman.qth.net>
Subject: [Elecraft] Serial port woes with KIO3B

Yesterday, I installed a KIO3B update kit in my K-3.  Everything appears
to work OK except for the USB serial port.  At first, this morning,
everything seemed to be working OK - the K3 was controlling my amp and
reading out frequency to DXLab Commander.  I started trying to configure
N1MM to read radio frequency, and things went steadily downhill from
there.  At this point, I have no frequency readout on either program,
and cannot send F-key messages from N1MM.  I have tried every available
COM port under Windows 10, and checked for hidden ports (none).  I have
restarted the computer several times with no change.

Can anyone suggest something to try, or a test that might reveal what's
going on?


--
73, Pete N4ZR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to rgarceau at snet.net