[Elecraft] K3/0-mini and FT8/Q65 / Remoterig

[Scott Townley]

I didn't find a simple way.

Assuming you have the remoterig set up for SSB/voice, what I did was to 
route the soundcard TX audio to the mic input on the radio RR.  To do 
that I used an old Rigblaster, which allowed me to easily switch the AF 
input to the RR between mic and soundcard. There are many ways to do 
this cheaper but I had the Rigblaster gathering dust.

As to RX audio, I used the SPKR output on the side of the K3/0-mini.  
That means switching between soundcard RX audio and a speaker/headset 
for human RX.  Or you could come up with a similar switching arrangement 
as with TX audio.


------------------------------

Message: 2
Date: Mon, 13 Mar 2023 13:30:26 +0100
From: Viggo Magnus Nilsen <la9nea at online.no>
To: Elecraft <Elecraft at mailman.qth.net>
Subject: [Elecraft] K3/0-mini and FT8/Q65 / Remoterig
Message-ID: <055b7e7113d46d1f90c87a11c3dc6b94 at online.no>
Content-Type: text/plain; charset=US-ASCII

Hello K3 owners.

My Remote setup is K3 connected to the Remoterig box at the QTH site, at
home operating it with K3/0-mini.,

I prefer CW, but from time to time  want to try some Digimodes.

WHAT TO I HAVE TO DO FOR THAT MODE WITH K3/0-MINI / REMOTERIG.?

Com port 1 and 2 at the Radio RRC is connected to the K3 ,and KPA500.

At the QTH K3 working very well with the connections Line in/Line out to
the PC in Q65 mode on EME.

73' Viggo LA9NEA

-- 
Scott NX7U