[Elecraft] Want to build a K2

[W3FPR]

Hank,

To use the KXPA100 with the K2, you will have to install the K2 Keying 
Output mod.  This is not available from Elecraft, but boards are 
available from FAR circuits.  The KXPA100 will bandswitch when RF is 
applied.
You might ask Dave W8FGU if he has any built up as kits dave at w8fgu.com.  
He had mentioned that possibility some time ago, but I don't know if it 
materialized.

73,
Don W3FPR

On 6/17/2023 1:15 PM, K4HYJ via Elecraft wrote:
> Hey folks.
>
> I want to try and tackle a more challenging kit build.  I built my K3S back
> in Oct 2018 and it was pretty easy.  Same for my KX3 2 years later.
>
>   
>
> The K2 looks like more of a real kit with challenges!  After seeing old
> posts here, I can see there are certain items no longer available from
> Elecraft due to parts availability.  Is there anything else discontinued
> besides the 100 watt amp and 100 watt antenna tuner?
>
>   
>
> I already own the 100 watt amp for my KX3 so I could use it maybe?  Will
> band changing be as seamless??
>
>   
>
> There are some decent discounts right now on packages.
>
>   
>
> Any advice would be greatly appreciated!
>
>   
>
> Thanks,
>
> Hank
>
> K4HYJ
>
>