[Elecraft] KPA500

[Ian Kahn]

There are also taps inside the KPA500 that need to be set correctly, for
the voltage you wish to use. The assembly manual fully describes setting
the taps appropriately, for your desired voltage.

73 de,

Ian, NV4C

On Mon, Jun 5, 2023, 10:58 AM Irwin KD3TB <idarack at gmail.com> wrote:

> Joe,
> On the back of the KPA 500 you will find a fuse plug. You will switch this
> between voltages using different fusses. Be careful to use the correct
> fusses for the specific voltage. You can find the directions in the manual.
>
> Irwin KD3TB
>
> On Mon, Jun 5, 2023 at 7:03 AM Josep via Elecraft <
> elecraft at mailman.qth.net>
> wrote:
>
> > Hi guys,
> > just a question.....I have recently bought a KPA500 (#0762) in the US.I
> > have another one at home that a friend of mine built for me in the US.I
> > know the amplifier works 100-120VAC and 200-240VAC so the question is if
> I
> > need to switch some kinda interruptor inside the amplifier.I need to know
> > that so when it comes here I can check wether its set, to 110VAC or
> 240VAC,
> > and correct it if needed.
> > Thanks for help.
> >
> >
> > 73,
> > JosepEA6BFMyWebsiteBUG #256  -  CWOps #3072  -  FOC #2182 (ex 1724)
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to idarack at gmail.com
>
> --
> Irwin KD3TB
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nv4c.ian at gmail.com
>