[Elecraft] WSJTX ON A MAC

[Richard Gilley]

Thank you all for the quick reply and suggestions.  Good work as all is well.

The CONFIG.PTT was set to other than OFF-OFF, made the change in settings ERR-PTT no longer an issue.

Following up on the Notes Guide and will make those changed also as I was getting the “Unable to creat shared memories ….” On a MAC M1.

Again thank you all for your kind replies.

R Gilley
AD1G

> On Jul 27, 2023, at 8:10 AM, Richard Ferch <ve3iay at gmail.com> wrote:
> 
> ERR PTT often means that CONFIG:PTT-KEY in the K3 is set to RTS-something
> (or DTR-something), and something in the computer is activating RTS (or
> DTR) at the time the radio is powered up.
> 
> If this is the cause, a simple solution for this is to set CONFIG:PTT-KEY
> to OFF-OFF (or OFF-DTR if you want to use DTR for CW keying), and in your
> radio control software (WSJT-X and any other programs you use for radio
> control) use CAT for PTT control.
> 
> 73,
> Rich VE3KI
> 
> AD1G wrote:
>> ...  I have receive and Tx ok but I also have  ERR PTT displayed. ...
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to richgilley123 at gmail.com