[Elecraft] semi qsk (vox) with the K4 need advice

[Mike Harris]

FWIW, my K3 driving an Acom 1000 is set to 12ms.

Regards,

Mike VP8NO

On 20/01/2023 17:47, David Hachadorian wrote:
> My AL-1500 has pretty slow relays.  I would guess that the AL82 is 
> similar.  In my K3, I have config/TX DLY set to 14 ms.
> 
> Dave Hachadorian, K6LL
> Yuma, AZ
> 
> On 1/20/2023 1:33 PM, Gerry via Elecraft wrote:
>> I usually use a foot switch with my K4 and AL82.
>>
>> I was wondering what would be the best settings for semi qsk  (vox)  
>> with the
>> K4 and AL82 to avoid hot switching.  I want to be conservative.
>>
>> What I've read so far online has been of little help.
>>
>> Tks
>>
>> 73
>>
>> Gerry
>> K1NY
>> ______________________________________________________________
>> Elecraft mailing list
>> Home:http://mailman.qth.net/mailman/listinfo/elecraft
>> Help:http://mailman.qth.net/mmfaq.htm
>> Post:mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by:http://www.qsl.net
>> Please help support this email list:http://www.qsl.net/donate.html
>> Message delivered tok6ll.dave at gmail.com 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to mike.harris at horizon.co.fk