[Elecraft] KPA1500 and K2

[Eric Norris]

You can do it with just an RCA cable if you have the keying mod on a K2/10,
or a K2/100.  N6TV can make you a Serial box that gives you band info, too,
if you have the K2 serial interface, but I could hear the KPA1500 polling
the K2--I don't think that was a problem with the Serial Box, but I never
solved it.

DO NOT CONNECT THE K2 SERIAL OUTPUT TO ANYTHING WITHOUT A CUSTOM CABLE OR
AN N6TV SERIAL BOX.

I got about 250w out of the KPA1500 with my K2/10, and of course full-tilt
disco boogie with my K2/100.

73 Eric WD6DBM

On Wed, Jan 11, 2023, 4:03 PM Karin Johnson <karinann at tampabay.rr.com>
wrote:

> Hello Group:
>
> Can I use a Elecraft KPA1500 with a Elecraft K2???
>
> What accessory cable will I require????
>
>
>
> Karin Anne Johnson  K3UU
>
> Palm Harbor, Florida
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to norrislawfirm2 at gmail.com
>