[Elecraft] P3

[Fred Jensen]

Can't speak to the K3s, but the K3 required a modification to the 1st IF 
[8 MHz] gain for my P3 to show weaker signals.  It was just a resistor 
change.

73,

Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County

Jim Murray via Elecraft wrote on 12/17/2023 12:05 PM:
> Hello all,  Having acquired a fully loaded K3s fairly recently I am behind the curve of those fortunate enough to have a K4.  Its taken several weeks to get a decent handle on the K3s and now on to the P3.  I have all the manuals including Fred Cadys K3s and P3.  I find the K3s to be excellent and pretty remarkable compared to the many other transceivers I've owned over nearly 50 years.  The P3 has the vga board and is connected up.  All is well Except;  weak signals do not show up on the P3.  I can hear a rather weak signal but nothing at that point on the P3.  My thought is at this point the P3 is not doing me much good looking for a weak dx signal.  I have to think I have something not set up right etc..  Any help on what I'm missing would be appreciated.Thanks,Jimk2hn
>



-- 
This email has been checked for viruses by AVG antivirus software.
www.avg.com