[Elecraft] KX2 question

[Rick Bates, nk7i]

For such documents that I (might) need when not at the computer, I use 
Dropbox.  That way it's in several places at once, including on my phone 
(which is always with me).

It's free, up to small storage limits, adequate for that task. If I need 
to share something, I send the link (which if a large file, doesn't clog 
my LAN, once it's in the cloud).

73,
Rick nk7i


On 12/4/2023 1:54 PM, Chris wrote:
> Thanks, Walter K6WRU:
>
> That was indeed the document I was mis-remembering as one page...
>
> But it describes how to get INTO the CW announce mode, but does not 
> tell how to EXIT the mode.
>
> I think I did a device reset to go back to turn CW announce OFF.
>
> I also note that I appear to need a newer version of the manual that 
> came with the radio. I downloaded the e-version, but my computer does 
> not fit in my day-pack!
>
> 73,
>
> Chris K0PF
>
> On 12/4/2023 9:13 AM, Walter Underwood wrote:
>> This all-text document has a physical description and documents the 
>> audio-CW feedback.
>>
>> https://ftp.elecraft.com/KX2/Mod Notes Alerts/KX2 CW UI, rev A3.pdf 
>> <https://ftp.elecraft.com/KX2/Mod Notes Alerts/KX2 CW UI, rev A3.pdf>
>>
>> wunder
>> K6WRU
>> Walter Underwood
>> CM87wj
>> http://observer.wunderwood.org/ (my blog)
>>
>>> On Dec 4, 2023, at 8:03 AM, Chris <wd5ibs at frii.com> wrote:
>>>
>>> I saw a one-page note on this but I cannot find it in my records. If 
>>> I recall it is a mode of some sort that causes the CW Identifier, 
>>> for handicapped hams, I think. I did a reset to clear it. Sorry for 
>>> being vague, it has been a couple months, but maybe support can 
>>> point you to that one-pager. It should be in the fw release notes, 
>>> really...
>>>
>>> 73,
>>>
>>> Chris,
>>>
>>> K0PF
>>>
>>> On 12/1/2023 9:59 AM, Bud wrote:
>>>> Folks …
>>>>
>>>> I recently invoked the latest firmware update on my KX2 (s/n  1031).
>>>> Upon beginning use of the KX2 after the firmware update  two 
>>>>  changes to the operating configuration were noticed.
>>>>
>>>> They are:
>>>>
>>>> 1)  Upon pressing any of the front panel push button switches, a CW 
>>>> identifier takes place.
>>>>   How do I delete this from happening?
>>>>
>>>> 2)  The “display” push button no longer displays the several 
>>>> functions it once did.
>>>>   What do I need to do to bring back the display functions when I 
>>>> push the “display” button?
>>>>
>>>> Thanks for any help in this matter …
>>>>
>>>> Bud,
>>>> NY1Z …
>>>>
>>>>
>>>>
>>>>
>>>> ______________________________________________________________
>>>> Elecraft mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:Elecraft at mailman.qth.net
>>>>
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>> Message delivered to wd5ibs at frii.com
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to wunder at wunderwood.org
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rick.nk7i at gmail.com