[Elecraft] K3 subreceiver works on CW only

[Erik Wheeler]

Ah yes, that was it! Thank you all!


> Message: 1
> Date: Fri, 25 Aug 2023 14:38:51 -0400
> From: Erik Wheeler <erik at wheeler.com>
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] K3 subreceiver works on CW only
> Message-ID:
>         <
> CA+e6vG7jhUyTTYOpmFKeys8SwpnjMWTbQhW71GG9nXXb_qCyLg at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Hi all,
>
> On my K3 (serial 1773) my sub-receiver only works on CW.
>
> On SSB, I just hear faint white noise.
>
> Is this just a setting problem? I've been through all the settings and
> reviewed the manual on the sub-receiver, but haven't been able to solve it.
>
> I have verified that the sub-receiver is using the main antenna.
>
> Thanks for any suggestions.
>
> Erik
> N1CFO
>
>
> ------------------------------
>
> Message: 2
> Date: Fri, 25 Aug 2023 16:17:52 -0400
> From: Gordon LaPoint <gordon.lapoint at gmail.com>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3 subreceiver works on CW only
> Message-ID: <a896b1e9-55a9-7043-55ba-82f64c6d37d0 at gmail.com>
> Content-Type: text/plain; charset=UTF-8; format=flowed
>
> Erik,
>  ?? This sounds like the filter setup for the sub receiver is not correct.
> Gordon - N1MGO
>
> On 8/25/2023 2:38 PM, Erik Wheeler wrote:
> > Hi all,
> >
> > On my K3 (serial 1773) my sub-receiver only works on CW.
> >
> > On SSB, I just hear faint white noise.
> >
> > Is this just a setting problem? I've been through all the settings and
> > reviewed the manual on the sub-receiver, but haven't been able to solve
> it.
> >
> > I have verified that the sub-receiver is using the main antenna.
> >
> > Thanks for any suggestions.
> >
> > Erik
> > N1CFO
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to gordon.lapoint at gmail.com
>
>
>
>
> ------------------------------
>
> Message: 3
> Date: Fri, 25 Aug 2023 20:53:24 +0000
> From: Michael Carter <Mike.Carter at unh.edu>
> To: Elecraft Reflector Reflector <Elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] K3 subreceiver works on CW only
> Message-ID:
>         <
> BL3P223MB0385FB3C3817E02F5ECB04DEE4E3A at BL3P223MB0385.NAMP223.PROD.OUTLOOK.COM
> >
>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hi Erik,
>
> Did you check the filter selection for
> the sub-receiver to be sure you don't
> have a blank slot selected for SSB?
>
> 73,
> Mike, K8CN
>
>