[Elecraft] Interesting observations after installing antenna switch

[W3FPR]

Ken,

Check the voltage/current ratings on the band data lines for both the 
amp and your antenna switch.
It sounds like they may not be compatible.  60 meters is encoded as 
"0000", so if the voltage is not high enough (perhaps due to 
insufficient current), it will show 60 meters.

73,
Don W3FPR

On 8/29/2023 3:25 PM, ken.kj9b at gmail.com wrote:
> Hi Ray.  Either I was unclear in my description, or it was mis-read.  According to the display of the amplifier, it is ALWAYS set for the 60 meter band, regardless of what band I am actually operating.
>