[Elecraft] KAT 500 Antenna Selection Problems

[Ken WA8JXM]

I have had that problem in the past.  Have you tried a 'reset
configuration"?

On Thu, Aug 3, 2023 at 12:44 PM Paul Ecker <eckerpw at gmail.com> wrote:

> In the KAT 500 Utility – Configuration- Antennas- Band- 17M;
>
>  I have Antenna 3 checked as Enabled and Antenna 3 as Preferred. No other
> antennas are selected for 17 m. This configuration has been  applied and
> saved. Setup is Flex 6600, KAT500, KPA500 & win 10 pc.
>
> The problem I am having is: with radio on 17 M, when I run a “tune”
> sequence, the KAT does not switch to Ant 3, in fact it will not let me
> manually switch to ant 3. I occasionally have the same issue with the tuner
> not switching on other bands, to the selected antenna as set up in the
> utility.
>
> Any suggestions on what may be causing this ?
>
>
> 73 Paul
>
> w2eck
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wa8jxm at gmail.com