[Elecraft] KPA1500 ATU question

[Jorge Diez - CX6VM]

thanks all very much for the tips

73,
Jorge
CX6VM/CW5W

El mar, 13 sept 2022 a las 15:29, Dick Dievendorff (<dick at elecraft.com>)
escribió:

> What I do is leave the ATU function ON for all bands.  If my 6 meter SWR
> is “really good”, the ATU tune operation (done once in a “training
> session”) discovers this and selects ATU bypassed as the preferred ATU
> setting. Both ATU LEDs are illuminated, indicating that the ATU function is
> enabled, but the current ATU a setting is bypassed.
>
> Some of my HF antennas have good SWR at one end of the band but need more
> ATU assistance at other frequencies.  I don’t turn the ATU on and off, my
> ATU relay settings are “bypassed” on some frequencies.
>
> You can choose the “really good” SWR threshold, by band, in a menu or the
> KPA1500 Utility.  I think it defaults to 1.2 to 1.
>
> 73 de Dick, K6KR
>
> > On Sep 13, 2022, at 10:14, Jorge Diez - CX6VM <cx6vm.jorge at gmail.com>
> wrote:
> >
> > hello
> >
> > How can I use the KPA1500 to remember what bands need ATU IN and what
> bands
> > need ATU BYP?
> >
> > I have ATU IN on HF bands, but when I change to 6 mts I need that KPA1500
> > change to ATU BYP
> >
> > Is this possible?
> >
> > thanks!
> > --
> > 73,
> > Jorge
> > CX6VM/CW5W
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to dick at elecraft.com
>


-- 
73,
Jorge
CX6VM/CW5W