[Elecraft] K3 INTERFACE WITH LDG Z100A

[Julia Tuttle]

That's an odd suggestion, Joe; LDG is no more responsible for the ports on
the K3 than Elecraft is for those on the Z100A. They may have experience
connecting a Z100A to a K3, but someone here may likewise have experience
connecting a K3 to a Z100A.

Greg, you'll need to take a look at the manuals for *both* products and see
what their interfaces look like. Hopefully the needed signals clearly match
up, but if not, feel free to come back to the list with the specific
signals you're having trouble routing or converting.

73,

Julie

On Fri, Sep 2, 2022, 18:32 Joe Subich, W4TV <lists at subich.com> wrote:

>
> I suggest you contact LDG for help with their product.
>
> 73,
>
>     ... Joe, W4TV
>
>
> On 2022-09-02 5:46 PM, greg best wrote:
> > I have tried to find a cable that goes from my K3 to the LDG Z100A tuner
> but all I see is just a cable with a Molex like connector going to the
> tuner and nothing on the other end of the K3 except bare wires (i.e. no
> connector). Does the tuner have to get connected to the K3 ACC jack?  Or
> does someone have a wiring diagram so I can marry the correct connections
> between the 2 units?
> >
> >
> >
> > 73’s,
> >
> > Greg N9GB
> >
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to julia at juliatuttle.net