[Elecraft] K3 / N1MM Keying and rig control

[Bert]

Hi Brian,

I use a Winkeyer between the radio and the PC and that takes care of the 
timing issue. Works great!
Bert VE3NR


On 2022-10-14 17:39, Brian Hunt wrote:
> I have been using a USB-to-serial converter cable for connection between the K3 and computer running N1MM+. I use DTR keying on the K3 with VOX and QSK on. This leaves the K3 internal keyer and paddle free to use at a different speed for fills, etc.
>
> I have noticed the CW timing from the computer to falter a bit once in a while depending on what else the computer is doing at the time. I try to minimize the number of apps running. Typical CW speed is 22-32 wpm so I don’t know how it would do faster than that.
>
> 73,
> Brian, K0DTJ
>
>> On Oct 14, 2022, at 07:23, dave arruzza via Elecraft<elecraft at mailman.qth.net>  wrote:
>>
>> To all:
>> What is the preferred method of keying and rig control when using a K3 with N1MM.
>> 73Dave W1CTN
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home:http://mailman.qth.net/mailman/listinfo/elecraft
>> Help:http://mailman.qth.net/mmfaq.htm
>> Post:mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by:http://www.qsl.net
>> Please help support this email list:http://www.qsl.net/donate.html
>> Message delivered tohuntinhmb at coastside.net
> ______________________________________________________________
> Elecraft mailing list
> Home:http://mailman.qth.net/mailman/listinfo/elecraft
> Help:http://mailman.qth.net/mmfaq.htm
> Post:mailto:Elecraft at mailman.qth.net
>
> This list hosted by:http://www.qsl.net
> Please help support this email list:http://www.qsl.net/donate.html
> Message delivered tove3nr at bell.net