[Elecraft] K3 / N1MM Keying and rig control

[Brian Hunt]

I have been using a USB-to-serial converter cable for connection between the K3 and computer running N1MM+. I use DTR keying on the K3 with VOX and QSK on. This leaves the K3 internal keyer and paddle free to use at a different speed for fills, etc. 

I have noticed the CW timing from the computer to falter a bit once in a while depending on what else the computer is doing at the time. I try to minimize the number of apps running. Typical CW speed is 22-32 wpm so I don’t know how it would do faster than that. 

73,
Brian, K0DTJ

> On Oct 14, 2022, at 07:23, dave arruzza via Elecraft <elecraft at mailman.qth.net> wrote:
> 
> To all:
> What is the preferred method of keying and rig control when using a K3 with N1MM. 
> 73Dave W1CTN 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to huntinhmb at coastside.net