[Elecraft] KX3 Question on S-Meter Calibration
D Remy
drh at dremy.com
Mon Oct 10 17:04:20 EDT 2022
Does that also apply to the K3?
David R Hourdequin, PE
828-421-6216
> On Oct 10, 2022, at 14:20, Don Wilhelm <don at w3fpr.com> wrote:
>
> Greg,
>
> The KX3 is designed around having the preamp on most of the time.
>
> 73,
> Don W3FPR
>
>> On 10/10/2022 1:58 PM, WA1JXR ALGIERI wrote:
>> I have noticed with my KX3 that the S-Meter is not calibrated that is 50 microvolts (-73 dBm) at the antenna connector equals a S9 signal only when the preamp is turned on. Is this normal and the way the KX3 is designed?
>> I thought it might be with the preamp off.
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to don at w3fpr.com
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to drh at dremy.com
More information about the Elecraft
mailing list