[Elecraft] Drive Control - K3 and FPA-1500

[Pete Smith N4ZR]

Thanks, Kent - that's what I thought, but it doesn't seem to be 
working.  I generally use the internal tuner, and I was hopping around a 
lot within bands, but unfortunately I didn't collect data on which hops 
produced warnings - either excessive current warnings or over-power 
readings on the LED scale.

73, Pete N4ZR
Check out the new Reverse Beacon Network
web server at<https://reversebeacon.net>.
For spots, please use your favorite
"retail" DX cluster.

On 11/6/2022 9:29 PM, K9ZTV wrote:
> Pete ...
>
> You have to first set the drive manually per-band on the K3. Once that is done, the K3 adjusts its drive to whatever you have set it to when changing to that new band.
>
> 73,
> Kent
> K9ZTV
>
>> On Nov 6, 2022, at 7:05 PM, Pete Smith N4ZR<pete.n4zr at gmail.com>  wrote:
>>
>> Just finished SS, and on many occasions when switching bands I found myself overdriving the KPA-1500 on the new band.  No harm done, but I thought the K3/KPA-1500 combination was supposed to manage drive on a per-band basis.  Did I get that wrong?
>>
>> -- 
>> 73, Pete N4ZR
>> Check out the new Reverse Beacon Network
>> web server at<https://reversebeacon.net>.
>> For spots, please use your favorite
>> "retail" DX cluster.
>> ______________________________________________________________
>> Elecraft mailing list
>> Home:http://mailman.qth.net/mailman/listinfo/elecraft
>> Help:http://mailman.qth.net/mmfaq.htm
>> Post:mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by:http://www.qsl.net
>> Please help support this email list:http://www.qsl.net/donate.html
>> Message delivered tok9ztv at socket.net