[Elecraft] K3 ERR XV3

[Mike Fatchett W0MU]

After setting the KXV3 board to B I get the ERR XV3 message.  I honestly 
don't remember if I upgraded this board.  I wish there was an easy way 
to check on what each radio has.  I suspect that I do not have this 
board.  I did see that others also had the same err message.  I am able 
to set the preamp 2 to on with the B showing.  I am not sure it is doing 
anything.  I guess I will have to take off the covers.

W0MU

On 5/8/2022 12:09 PM, Mike Fatchett W0MU wrote:
> That was it!  Thanks!
>
>
> On 5/7/2022 4:40 PM, Robie Elms wrote:
>> Mike,
>>
>> The K3 2nd preamp is on the KXV3B transceiver interface. It can be 
>> activated for 12, 10 & 6 m.
>>
>> Robie AJ4F
>>
>> On Sat, May 7, 2022 at 4:40 PM Mike Fatchett W0MU <w0mu at w0mu.com> wrote:
>>
>>     I thought there were two settings for the preamp  Like a 1 and 2?
>>     I have
>>     the new synth boards.
>>
>>     W0MU
>>
>>
>> ______________________________________________________________
>>     Elecraft mailing list
>>     Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>     Help: http://mailman.qth.net/mmfaq.htm
>>     Post: mailto:Elecraft at mailman.qth.net
>>
>>     This list hosted by: http://www.qsl.net
>>     Please help support this email list: http://www.qsl.net/donate.html
>>     Message delivered to ruler55 at gmail.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w0mu at w0mu.com