[Elecraft] KX3/KPA100/Powerwerx Question
[email protected]
df3dd at darc.de
Fri Jun 10 17:44:05 EDT 2022
Or this. While vacuuming it’s recommended to block the fan so it cannot rotate. In some cases, when the blades are driven bei the airflow too fast, the fan works as a generator and sends some voltage into the unit - which can be harmless but also can destroy sensitive electronics (if there is any inside the supply).
73
Hans, DF3DD
(Please forgive my english, it was 50something years ago when I learned it at school. And forgive if I write naturalnesses instead of real hints.)
> Am 10.06.2022 um 16:12 schrieb Kevin McQuiggin <mcquiggi at sfu.ca>:
>
> I suggest taking the lid off of the power supply and inspecting the fan for dust. It can accumulate and affect the free rotation of the fan, generating noise. A vacuuming might be in order.
>
> 73,
>
> Kevin VE7ZD/KN7Q
>
>
> On June 10, 2022 1:18:51 a.m. PDT, "DF3DD at darc.de" <df3dd at darc.de> wrote:
> Maybe it’s the cooling fan of the power supply. When more power is needed the supply gets warmer and the fan spins faster - so you can hear it then. If it’s too annoying, there are more quiet fans with which you could replace the original fan.
>
> 73
> Hans, DF3DD
>
>
>
>
> Am 10.06.2022 um 07:37 schrieb Jim Ruff via Elecraft <elecraft at mailman.qth.net>:
>
> I have a KX3/KPA100/Powerwerx setup. When I run the rig with the amp on, my Powerwerx 30 amp power supply makes a whirling sound. If I run the rig without the amp, the power supply makes no noise. When I run may K3 it makes no noise. Is there a problem causing the noise?Thanks,Jim W7JHR
>
>
>
> Sent from Yahoo Mail. Get the app
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to df3dd at darc.de
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to mcquiggi at sfu.ca
More information about the Elecraft
mailing list