[Elecraft] KV5J's line of Digital Displays for Elecraft's W2, KXPA100, KPA1500, KAT500 and KPA500 amps

[DF3DD@darc.de]

Should there be advertisings in a mailing list?



> Am 07.06.2022 um 23:01 schrieb Keith Ennis via Elecraft <elecraft at mailman.qth.net>:
> 
> KV5J's line of Digital Displays for Elecraft's W2, KXPA100, KPA500, KAT500 and KPA1500
> 
> 
> Digital Display Unit for Elecraft's KPA500 amplifier:
> -
> -
> WITH REPAIR COST AND DOWN TIME FOR REPAIRS, THIS WILL KEEP YOU INFORMED OF HOW YOUR AMP IS DOING.
> -
> -
> Instead of seeing only 1 crucial reading, monitor all 7 at the same time.
> 1. Power amplifier's heat sink temperature
> 2. Power amplifier's high voltage supply voltage
> 3. Power amplifier's current
> 4. Power amplifier's output power
> 5. SWR that the KPA500 sees at its output
> 6. Displays Operate/Standby mode
> 7. Displays Band amp is tuned to
> -
> KEEP AN EYE ON YOUR KPA500'S STATS! BEFORE SOMETHING HAPPENS!
> -
> -
> Digital Display Unit for Elecraft's W2 Watt Meter:
> 
>  
> The digital read out on the Display Unit takes the guess work out of the LED light bars.
> 
> -
> Digital Display Unit for Elecraft's KXPA100 amplifier:
> -
> Don't wait for a fault light to come on.  Keep an eye on 5 crucial readings at all times.
>  
> 1. Power amplifier's heat sink temperature
> 
> 2. Power amplifier's high voltage supply voltage
> 3. Power amplifier's current
> 4. Power amplifier's output power
> 5. SWR that the KXPA100 sees at its output
> -
> -
>  
> -
> Digital Display Unit for KAT500:
> -
> This unit displays the front panel settings.
>  
> If the tuner is in bypass or not.
> 
> Displays the capacitance and inductance used.
> What type of circuit is used. LC or CL.
> SWR of both before and after a tune cycle is completed.
> -
> -
> Digital Display Unit for Elecraft's KPA1500 amplifier:
>  
> Displays the same display that is on the KPA1500 Amplifier 
> 
>  
> Change the display on the KPA1500 and the display changes to show this same screen
> 
> -
> -
> All of the Digital Display Units:
> -
> Display Unit can be located at a more visible location
>  
> Up to the RS232 limit from unit
> 
> -
> Easy to read 2 line display
>  
> No USB or serial cable to computer
> 
>  
> No com port in Windows to manage
> 
>  
> No computer needed
> 
>  
> Plug and Play
> 
>  
> Simply connect the SUPPLIED dc power cable (with inline on/off switch) from the DDU to power supply and SUPPLIED  SERIAL data jumper cable to the device
> 
>  
> Retains all functions of the front panel
> 
>  
> All displayed info obtained directly from the device
> -
> Only 4" x 4" x 2"
> -
> For more information and ordering go to:   http://www.kv5j.com/store
>  
> Reviews:
> 
>  
> https://www.eham.net/reviews/view-product?id=14701
> 
> -
> https://www.eham.net/reviews/view-product?id=14820
>  
> 
> 
> $119.99 plus shipping
>  
> 
> Keith, KV5J
> 
>  
> http://www.kv5j.com
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to df3dd at darc.de