[Elecraft] KX3/WSJT-X Problem

[Jim Rhodes]

How much deflection do you see on the ALC meter? Need to check out the
settings on the sound card, the mike level on the rig and in WSJT-X. Also
the settings under the Sound settings/Advanced settings/ app settings to be
sure the source is set to the correct device. And Windows updates like to
change it.

On Mon, Jun 6, 2022 at 3:01 PM Jim Ruff via Elecraft <
elecraft at mailman.qth.net> wrote:

> I got my KX3 out that I haven't used in almost a year to get ready for
> Field Day and I can't get it to TX when using FT8.  My setup is
> KX3/KXPA100, OCFD, Windows 10, WSJT-X v. 2.5.4.  On RX it's working
> properly, I'm seeing the world.
>
> The antenna is tuned, the CAT control is working, the amp is functioning,
> but when I TX, it isn't showing up on PSK-Reporter.  To double check I had
> a club member look for my signal on FT8 and there was no joy, although he
> did hear me fine when we tested the rig in SSB.  For comparison, I hooked
> up my K3  and TX'd at 5 watts and it showed up all over the world on
> PSK-Reporter.
>
> Am I missing something in the settings? Please help!
> Thanks,Jim W7JHR
>
>
>
>
>
> Sent from Yahoo Mail. Get the app
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jimk0xu at gmail.com



-- 
Jim K0XU
jim at rhodesend.net