[Elecraft] K3 50MHz power out

[Ray]

To measure RF  power accurately, it needs to be into a Known Impedance.
  I would run the RF Calibrate Test, in the K3 Utility program. 
Ray WA6VVAB K3

Sent from Mail for Windows

From: Josep via Elecraft
Sent: Monday, June 6, 2022 7:32 AM
To: Elecraft Reflector
Subject: [Elecraft] K3 50MHz power out

My K3 seems to send out ~50w (1.5:1 SWR) to the antenna. If I connect a dummy load, ~40w (1.1:1 SWR).Should it send out more RF power or this is what is expected.? I thought I read it should be something around 90w (?)
Any suggestions.?
Thanks,


73, 
JosepEA6BFMyWebsiteBUG #256  -  CWOps #3072  -  FOC #2182 (ex 1724)
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to wa6vab at gmail.com