[Elecraft] Kanga R2pro &T2 kits

[hawley, charles j jr]

Here are two ideas...


Si5351A VFO/SigGen (qrp-labs.com)<https://www.qrp-labs.com/vfo.html>
Si5351A VFO/SigGen - QRP Labs<https://www.qrp-labs.com/vfo.html>
3-30MHz Low Distortion Sinewave Signal Generator. The Si5351A Synth in the VFO/SigGen kit produces a squarewave output. Starting in firmware version s1.03 the processor can control the 6 relays in the 6-band Relay-switched LPF kit.This feature can be used to automatically select a LPF depending on the VFO operating frequency, to optimally remove the harmonics and leave only a nice high quality ...
www.qrp-labs.com
XG3_XG3 RF Signal Source – Elecraft<https://elecraft.com/products/xg3>
[http://cdn.shopify.com/s/files/1/2029/4979/products/XG3_550_1024x1024.jpg?v=1518590481]<https://elecraft.com/products/xg3>
XG3_XG3 RF Signal Source – Elecraft<https://elecraft.com/products/xg3>
Introduction The XG3 is a powerful programmable signal source that fits in the palm of your hand. It's a versatile tool that may be used for receiver testing, receiver alignment, RF signal tracing and troubleshooting and may even serve as a VFO or local oscillator or homebrew projects. Overview OVERVIEW The XG3 is a
elecraft.com


​Chuck Hawley
 c-hawley at illinois.edu

 Amateur Radio, KE9UW
 aka Jack, BMW Motorcycles