[Elecraft] KPA500 / 270V ERR

James Bennett w6jhb at mac.com
Tue Jul 19 14:01:34 EDT 2022


Folks - I’ve exchanged email with Rob at Elecraft support. He tells me that a failed R16 on the power supply board should have no effect on the 60V supply, so I’m opting to NOT rip the amp apart in search of R16. Waiting on Rob to send me an RSA and the amp will be off to Watsonville for some first aid. I’ll post back here when it is returned and let you know what went south.

73, Jim / K7TXA


> 
>> On Jul 17, 2022, at 4:04 PM, Bruce Forsberg <bruce.forsberg at gmail.com <mailto:bruce.forsberg at gmail.com>> wrote:
>> 
>> James I had the 270 V Err message on my KPA500 as well, S/N 3406. It turned
>> out to be R16 on the PS board had opened (S/B 100 ohms). This resistor
>> feeds the voltage multiplier circuit to get to 270V. Don't know if this is
>> your problem or not but does not hurt to check. It is an SMD resistor and I
>> think is accessible from the top.
>> 
>> Bruce, WB6IZG
>> 
>> On Sun, Jul 17, 2022 at 2:51 PM James Bennett via Elecraft <
>> elecraft at mailman.qth.net <mailto:elecraft at mailman.qth.net>> wrote:
>> 
>>> Hi - I’ve had my KPA500 serial number 3645 for several years and until
>>> today have had zero problems with it. Previously it was driven by a K3;
>>> currently (until today!) a K4D. Last time I used it, it worked great. Today
>>> I powered it on after having it off for several days and when I went to
>>> Operate mode, I got the dreaded 270V ERR display. When I display HV it
>>> shows “1”. Everything else seems to be OK - band changing works fine,
>>> metering of the power and frequency are OK - just can’t go to Operate mode.
>>> The top cover is on just as tight as it has been for years. Fuses are all
>>> OK.
>>> 
>>> Looked through the archives and did see a few hits, but most were related
>>> to loose top cover or incorrect voltage settings.
>>> 
>>> I’ve fired off an email to Elecraft support earlier today but thought I’d
>>> run it by the owner community too.
>>> 
>>> Suggestions?
>>> 
>>> Jim Bennett / K7TXA
>>> Eagle, ID
>>> 
>>> 
>>> 
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft <http://mailman.qth.net/mailman/listinfo/elecraft>
>>> Help: http://mailman.qth.net/mmfaq.htm <http://mailman.qth.net/mmfaq.htm>
>>> Post: mailto:Elecraft at mailman.qth.net <mailto:Elecraft at mailman.qth.net>
>>> 
>>> This list hosted by: http://www.qsl.net <http://www.qsl.net/>
>>> Please help support this email list: http://www.qsl.net/donate.html <http://www.qsl.net/donate.html>
>>> Message delivered to bruce.forsberg at gmail.com <mailto:bruce.forsberg at gmail.com>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft <http://mailman.qth.net/mailman/listinfo/elecraft>
>> Help: http://mailman.qth.net/mmfaq.htm <http://mailman.qth.net/mmfaq.htm>
>> Post: mailto:Elecraft at mailman.qth.net <mailto:Elecraft at mailman.qth.net>
>> 
>> This list hosted by: http://www.qsl.net <http://www.qsl.net/>
>> Please help support this email list: http://www.qsl.net/donate.html <http://www.qsl.net/donate.html>
>> Message delivered to w6jhb at me.com <mailto:w6jhb at me.com>



More information about the Elecraft mailing list