[Elecraft] Just finished KX1

[Ron]

Built the ATU, testing it and suddenly no rf output
Fiddled around with the main board, removed ATU. No rf, no rf. Then rf.
Then dead again. Seems to be an intermittent, but all my solder work is
really good, and tested thoroughly during and after construction, (yes
toroids are fine). Not my first kit.
The processor seemed  pretty loose in the socket. I bent the pins outward,
reseated it and now it is firmly in there, was not before. Working now when
TUN engaged, but I am not confident it won't crap out again.
Any ideas? It's out of the case now, l am not too  confident about it now.
Put it back in, and it crapped out again. This was before I re bent the
processor pins.