[Elecraft] KPA500

[Ian Kahn]

Joseph,

There is no soldering required to assemble the KPA500. If you can use basic
tools (screwdrivers, pliers, etc.), you'll have no issue assembling it. The
assembly manual is also VERY well-written.

You should be fine assembling it yourself.

73 de,

Ian, NV4C

On Fri, Jul 8, 2022, 9:20 AM Josep via Elecraft <elecraft at mailman.qth.net>
wrote:

> Hi guys,
> I ordered (2 months ago) a KPA500 from Elecraft. I thought I have ordered
> assembled but looks like I have done it wrong and asked for kit.! Now I
> have received all the parts and will have to assemble it myself. I see it
> says no-soldering kit so I assume I just have to plug the modules in and
> go, is that right.? If more complicated, I will have to look for a
> professional as I don’t know much about electronics.! Hope I can fix it
> myself.
>
>
> 73,
> JosepEA6BFBUG #256  -  CWops #3072  -  FOC #2182 (ex 1724)
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nv4c.ian at gmail.com