[Elecraft] P3 Sprogs

[Victor Rosenthal 4X6GP]

Trevor,

Try another coax jumper between the K3 and P3. I have heard of this 
problem being caused by poor connection of the shield braid (or 
low-quality braid) in the jumper.

73,
Victor, 4X6GP
Rehovot, Israel
CWops #5
Formerly K2VCO
https://www.qsl.net/k2vco/

On 31/01/2022 10:09, MØTDZ wrote:
> I am sure I have seen some threads on this before so please accept
> apologies If i am going over something twice.
> 
> Having moved to an area with a  much lower noise level I note loads
> of sprogs / spurious signals following me around on the P3
> panadapter.  Is there a common cause of these (im presuming they are
> generated by the K3S) and anything I should/could be doing to get rid
> of them?
> 
> Trevor MW0TDZ / M0DX
> 
> 
> ______________________________________________________________ 
> Elecraft mailing list Home:
> http://mailman.qth.net/mailman/listinfo/elecraft Help:
> http://mailman.qth.net/mmfaq.htm Post:
> mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net Please help support this
> email list: http://www.qsl.net/donate.html Message delivered to
> k2vco.vic at gmail.com