[Elecraft] KPA1500 Remote Software Question

[Ken K6MR]

I don't remember the slider ever moving in response to the fan speed while in Auto mode.  The current fan level is noted in the lower info bar by a number (1 - 5), but that's it.

Ken K6MR

________________________________
From: elecraft-bounces at mailman.qth.net <elecraft-bounces at mailman.qth.net> on behalf of Ed G <ed.n3cw at gmail.com>
Sent: Sunday, January 30, 2022 1:29 PM
To: elecraft at mailman.qth.net <elecraft at mailman.qth.net>
Subject: [Elecraft] KPA1500 Remote Software Question

Folks,
     Using the KPA1500 remote program. There is a slider control for the fan just below the temp bargraph.  I can manually adjust the slider to give me different fan speeds, so the control is communication with the KPA1500.
     I seem to remember when I first installed the remote software that the slider position responded to the KPA1500’s automatic fan speed.  I could look at the position of the slider and know (while wearing headphones) what the fan speed was.  But that no longer seems to be working, and the blue slider remains at the far left position even when the amp fans are running.  So I’m not quite sure how this slider is supposed to work. If I set min fan speed in the KPA1500 menu to “1” the slider position will move to “1”  It just doesn’t move when the fan is set to “auto” and comes on by itself.
--Ed, N3CW—




--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k6mr at outlook.com