[Elecraft] KPA500 on 10Meters

[ncelarry at scicable.com]

I have a K3,KAT500 and KPA500. I had a station on 10 Meters this 
afternoon that I wanted to reach.

The KPA500 did not work on 10M as if it was in standby mode (it was 
not), the KAT500 tuner didn't  tune either the K3 showed 1.0-1 5W all 
across the 10m band but no relays clicks in the KAT500. I tested after 
this happened and both work as expected on all other bands. It has been 
years since I used 10M.  The firmware is current on all three units.

Any thoughts or ideas.

TIA

Larry NA0F