[Elecraft] K Line: Signal loss in a QSO

[Dave (NK7Z)]

If I remember correctly, 5 watts is a power level to avoid...  As is 50 
Watts.  I believe it messes with the TX calibration.

73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources

On 1/15/22 14:39, KE8G wrote:
> Back the power off below the 12 watts, and see if you get anything.
> 
> Same thing had happened to me today, so running K3s at 5 watts, and the
> Kpa500 is putting out 80-90wstts
> 
> 73 de KE8G - Jim
> 
> On Sat, Jan 15, 2022 at 13:04 Ronnie Hull <w5sum at comcast.net> wrote:
> 
>> I had the exact same problem! It’s been Elecraft for a few months now.
>> Hopefully I will get it back before summer
>> W5SUM
>>
>> Sent from my iPhone
>>
>>> On Jan 15, 2022, at 11:22 AM, Linda M <wa6vab at gmail.com> wrote:
>>>
>>> 
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to w5sum at comcast.net
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to ke8g.jim at gmail.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dave at nk7z.net
>