[Elecraft] K3s USB sound card not receiving MMTTY audio

[Fred Jensen]

You can eliminate this problem in the future by just leaving it on LINE 
IN all the time.  Of course, that makes phone hard but it works for me. 😉

73,

Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County

Mike Dodd wrote on 1/9/2022 7:42 PM:
> Aargh! Aargh! Aargh! (Sound of head banging on desk.)
>
> The problem was that I did not have the K3s set to use the line input! 
> I.e., MAIN:MIC SEL menu entry was not set to LINE IN.
>
> I feel stupid for overlooking this setting, but honestly I don't 
> remember doing it in the past when setting up for other RTTY contests, 
> or switching back to MIC afterward. I need to check MMTTY and N1MM to 
> see if either sends any commands to the K3 to do this automatically.
>
> To make matters worse, I have a text document that shows connections 
> and settings for the K3, but it didn't mention the MIC SEL menu entry; 
> it only said to set the MIC (line) level. I completely missed the 
> implied line input selection. You can bet that is now fixed!
>
> So, problem solved. THANK YOU to everyone who offered suggestions here 
> and via private email. I hope I can avoid this embarrassing situation 
> in the future.
>



-- 
This email has been checked for viruses by AVG.
https://www.avg.com