[Elecraft] K4 Ethernet interface

[Henk Remijn PA5KT]

The K4 is accessible through telnet on port 9200.

No security.

It is always a good idea to have security but I would prefer to have the 
telnet without security and put the security in the network.

Make sure you have a good firewall between the internet and your radio 
equipment. Dont trust your internet provider. Always put a firewall 
between your internetprovider firewall/router en your home network.

73 Henk PA5KT

Op 8-2-2022 om 21:03 schreef Magnus Danielson via Elecraft:
> Dear all,
>
> I have tried to look at the K4 Programmers manual, and it remains 
> fuzzy on how one should connect to the K4 on the Ethernet port. All 
> the commands is wonderful to have, and that part is nicely documented. 
> I understand that the real time streaming parts is not done yet, but 
> just being able to do the normal commands would be a step in the right 
> direction.
>
> I do hope that there is fair security of SSH/TLS level, as we run this 
> over network. For real-time streaming, look at RIST.
>
> Cheers & 73,
> Magnus SA0MAD
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to pa5kt at remijn.net