[Elecraft] Band Data output?

[Christian Friess]

Hi Martin,

K3 0  --->   band decoder BCD1
K3 1  --->   band decoder BCD2
K3 2  --->   band decoder BCD3
K3 3  --->   band decoder BCD4

should work to your needs

I am using the first version of the band decoder from remoteqth.com

You can drop me an email to dl2mdu at darc.de

73 de Chris, DL2MDU


Am 09.08.2022 um 13:43 schrieb dm4im:
> Elecrafters,
> i control a 6*2 switch via a remoteqth.com Band Decoder II using 
> RS-232 sniffing mode. Not happy with that. I like to switch to Band 
> Data output from the 15-pin sub-D ACC connector, but am a bit confused.
> The band decoder manual shows connections labeled BCD-1 through BCD-4.
> The K3 manual labels it's outputs Band0 OUT through BAND3 OUT.
> What goes where?
> Thanks.
>
> Martin, DM4IM
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dl2mdu at darc.de