[Elecraft] KX2: Transmit Power 10m Band

[Michael Urspringer]

Elecraft KX2:

If I set the transmit power to 10W on the 10m band, it seems that the
output power is 0W if I try to send. At least the RF power display does not
display anything. Same with 9.8W. If I set the value to 9.6W (or lower)
then everything is back to normal. This does only happen on 10m, all other
bands are fine with the 10W power setting. Is this a known bug or is
something wrong on my side?

Thanks,
Michael