[Elecraft] Elecraft T1 Tuner Issue

[Paul Jewell]

Some additional information

  * the firmware version is 1.07, not 1.7
  * The yellow LED is flashing in groups of 4 with a period of about 1
    second, and a small (<1s) delay before the next group of 4.
  * The unit doesn't power off.
  * This is with a new battery.

Other than this, it all seems to be working.

Any ideas?

Many thanks!


On 17/04/2022 15:47, Paul Jewell wrote:
> Good afternoon,
>
> I have a Elecraft T1 tuner which I used last summer, but have had it 
> stored away for several months. Today I have been trying to use it 
> again with my KX3, but I am having an issue which I can't resolve. The 
> yellow LED is flashing continuously, as it would when selecting or 
> deselecting the tuner. In fact, tapping the BYP button without first 
> tapping the PWR button does exactly that - the tuner is toggled 
> between in-circuit and bypass, as demonstrated by the yellow and green 
> LEDs. The info function seems to work as expected as well. The other 
> issue - the unit doesn't seem to turn itself off - If I leave it with 
> the battery in, the yellow LED continues to flash seemingly indefinitely.
>
> I don't remember this behaviour last time I used it, and looking in 
> the handbook seems to suggest it isn't the normal behaviour. Can any 
> of you give me any advice about this issue? According to the sticker 
> on the processor, I am running firmware 1.7 1.07.
>
> Many thanks!
>
> Best regards,
> Paul
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to paul at teulu.org