[Elecraft] [FOC] K3 problem solved.!!!

[Harry]

Hello

I guess in the KPA3 config there is the KPA not „on“.

KPA3 amplifier module: set the KPA3 menu
entry to PA NOR. See menu entry listings for
information on other settings.

Set to PA NOR if KPA3 100-W amp installed. Set to PAIO NOR if KPA3 is
not installed, but the KPAIO3 transition PC board is. Other settings include PA
BYP (disables KPA3 if installed),PA fan test settings (PA FN1-FN4 or PAIO
FN1 -FN4 ), and PAIO BYP (if transition board is installed, but not the KPA3
module, this setting can be used to test the high power bypass relay)
161 de Harry
Gesendet von Mail für Windows

Von: 'Josep' via foc_members
Gesendet: Montag, 4. April 2022 12:08
An: elecraft at mailman.qth.net; cwops at groups.io; foc_members at googlegroups.com
Betreff: [FOC] K3 problem solved.!!!

Howdy guys, good new here.!!! 

just to let y´all know that I have finally solved the problem in my K3..!!!

A Ham friend has given me a old cable Serial-USB and it has worked.!! The K3 is now running again.! Very happy here so I don´t need to send it to Italy.!

Theres one thing I don´t understand and it is related with the PWR, I can see only 12W.! Why it´s not sending 100W like the first days I used it.? I does not go over 12W (?), Can that be due to high SWR.? The tuner has matched the antenna but...(?) Not 100W out by now, any tips.?

Thank you so much for all your help.!



73, 

Josep
EA6BF
MyWebsite
BUG #256  -  CWOps #3072  -  FOC #2182 (ex 1724)
-- 
You received this message because you are subscribed to the Google Groups "foc_members" group.
To unsubscribe from this group and stop receiving emails from it, send an email to foc_members+unsubscribe at googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/foc_members/2132775086.797772.1649066934882%40mail.yahoo.com.