[Elecraft] K3 MCU download /

[Dick Dievendorff]

There are step by step instructions in K3 Utility Help, Trouble Shooting. 

73 de Dick, K6KR

> On Apr 3, 2022, at 13:25, Don Wilhelm <don at w3fpr.com> wrote:
> 
> Go to the manual and look up how to recover from that condition (Forcing a firmware download).
> It on page 42 of my old manual under Firmware Updates, the page may have changed in newer manuals.
> It is easy to do and does not have to  go to a repair facility.
> 
> 73,
> Don W3FPR
> 
>> On 4/3/2022 1:37 PM, hp via Elecraft wrote:
>> Here is one line from an EA6 message about a K3 he just purchased .
>> 
>> Elecraft K3 is stuck at MCU LD and need to be sent to Italy to Elecraft Official Service to recover it.
>> 
>> Are there any tricks to recover without sending it to a service site ??
>> 
>> I have told him how to subscribe to the reflector and gave him a link to the archives
>> but maybe someone has a quick answer which I can forward to him .
>> 
>> Hank K7HP
>> 
>> 
>> 
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to don at w3fpr.com
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dick at elecraft.com