[Elecraft] K3/0 as a code oscillator

[Ed K1EP]

Just turn on TX TEST mode on the K3, no need to fiddle with power. The K3/0
should also work, but I always key the RRC so I am not positive.

reply to: K1EP at arrl.net

On Thu, Sep 23, 2021, 20:25 Ted Edwards W3TB <w3tb.ted at gmail.com> wrote:

> I use my K3 as the oscillator for teaching my CWadvisors Beginners Class.
>
> I turn the power down to zero watts.  With a set of ear buds I can put one
> over the laptop microphone with a paper clip rigged to hold it on and the
> other in one ear.
>
> Rube Goldberg would be so proud!
>
>
> On Thu, Sep 23, 2021 at 20:02 William Liporace <wc2l at wc2l.com> wrote:
>
> > Hi Folks,
> > Can you use a K3/0 as a code oscillator?
> > I wanted to take it to work as a code oscillator
> >
> > TNX Will WC2L
> >
> > --
> > William Liporace WC2L
> > http://www.wc2l.com or http://dxc.wc2l.com
> > AR-Cluster Node  telnet dxc.wc2l.com or 144.93 MHz
> > wc2l at wc2l.com
> >
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to w3tb.ted at gmail.com
> >
> --
> 73 de Ted Edwards, W3TB and GØPWW
>
> and thinking about operating CW:
> "Do today what others won't,
> so you can do tomorrow what others can't."
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k1ep.list at gmail.com