[Elecraft] K3 Display Won't Shut Off

[Ray]

Yes, Alarm and Remote Operations Settings.
Ray WA6VAB  K3

Windows  0


From: Drew AF2Z
Sent: Thursday, September 16, 2021 5:13 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 Display Won't Shut Off

I've had the same effect by setting the K3's Alarm to ON then turning 
off the p/s. When the p/s is turned on again (and maybe the K3 Power 
button pressed; I forget the exact sequence now) the LCD backlight comes 
on. So, you might want to check the Alarm setting.

73,
Drew
AF2Z


On 09/16/21 18:30, Jim McCook wrote:
> When I plug the ACC connector cable for the KPA1500 into my newly 
> acquired spare K3, the POWER button doesn't shut off the backlight in 
> the display or the P3 that's connected to it.  As soon as I remove that 
> connector or shut off the PS, it powers down normally.
> 
> This doesn't happen with the other K3 using the same cable.  All is normal.
> 
> Looking in the archives I saw something about a D10 removal, but 
> couldn't find the specific info as to where it is and what the access 
> is.  It was described as an early mod, but this K3 is a later version 
> #6695.  Any specific ideas where the problem is and how to fix it?
> 
> 73, Jim W6YA
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to pubx1 at af2z.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to wa6vab at gmail.com