[Elecraft] Elecraft K-Pod manual updated -- now covers use with the K4

[Fred]

Hmmm ... and here I thought I was way too old to learn new things.

1.  There's a K-Pod utility
2. There's an update for K-Pod firmware
3.  My K-Pod runs with just the flat cable inserted and no wall wart needed
4.  To get the K-Pod utility to work, you have to do some finger 
gymnastics on F1/F4
5. The new FW rev really does change the encoder rate

All I'm missing now is, "Do I like my old rate [1/2 the VFO A rate] or 
the 1:1 rate?"  I'll try the new 1:1 for awhile.  Odds are very high 
I'll get used to it right away and not notice the difference.

73,

Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County

Jim McDonald wrote on 10/31/2021 4:05 PM:
> From: Bob Wilson, N6TV <n6tv at arrl.net>
> Sent: Sunday, October 31, 2021 17:52
> To: Jim McDonald <jim at n7us.net>
> Cc: john at kk9a.com; Elecraft Reflector <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] Elecraft K-Pod manual updated -- now covers use with the K4
>
> Did you try upgrading the K-POD firmware to 1.12 to use these new features?
>
> 1.12 10/20/2021
> Holding down F4 on power up selects encoder 1:1 rate.
> Holding down F5 on power up selects 1:0.5 rate.
>
> 73,
> Bob, N6TV


-- 



-- 
This email has been checked for viruses by AVG.
https://www.avg.com