[Elecraft] K3 / WSJT-X Delayed Transmit

[Bob Schwerdlin]

The current version of hamlib is, 4.3

I had similar delay of TX issues with my FT-1000D and WSJT-X on Linux.  
After I updated to hamlib 4.x from version 3.3, my issues went away.  
Additionally, all the current rigs were updated in the library.  Note, 
they are all now four digit radio codes, whereas version 3.3 was mostly 
three digit radio codes.

Bob, WG9L

On 10/11/2021 2:34 PM, Joe Subich, W4TV wrote:
>
> Update to the latest WSJTX and hamlib.  The problem is due to a timing 
> issue in the older versions of hamlib not allowing WSJTX to begin audio
> until it receives certain CAT responses from the K3/K3s.   Older
> versions of hamlib were doing too many (unnecessary) CAT commands.
>
> 73,
>
>    ... Joe, W4TV
>
>
> On 2021-10-11 3:23 PM, James Bennett via Elecraft wrote:
>> David -
>>
>> I’ve played with the VOX Gain to no avail - at zero the rig never 
>> transmits, and at 100 (where it has been sitting) I get the delay. 
>> Various settings in between have no effect. The Delay controls how 
>> quickly the rig goes back into receive mode after speaking. But, 
>> thanks for the hints!
>>
>> Jim Bennett / K7TXA
>> Eagle, ID
>>
>>
>>> On Oct 11, 2021, at 12:00 PM, D Remy <drh at dremy.com> wrote:
>>>
>>> I know nothing about operating in the digital modes but wonder if 
>>> the delays might be changed with Vox Gain and Delay settings.
>>>
>>> Good luck!
>>> David, NS4V
>>>
>>>
>>> David R. Hourdequin, PE
>>> Specialty Heavy Timber Engineer
>>> 828-421-6216
>>>
>>>> On Oct 11, 2021, at 13:57, James Bennett via Elecraft 
>>>> <elecraft at mailman.qth.net> wrote:
>>>>
>>>> Hi Folks,
>>>>
>>>> Wondering if someone on the list might be able to solve this one. 
>>>> I’m using a K3 and while CW is my main passion, I do dabble in FT8 
>>>> occasionally. I’ve noticed that the radio does not start 
>>>> transmitting right at the start of the 15 second FT8 cycle. It will 
>>>> start anywhere from 2 - 5 seconds into the cycle. I can’t help but 
>>>> think that is not a good thing and could be the cause of an 
>>>> occasional missed QSO. I DO make QSOs but this kinda bothers me. 
>>>> The audio signals are delayed this amount of time, as is the red TX 
>>>> light coming on - I am using VOX . Same thing happens when I press 
>>>> the TUNE button - it takes anywhere from 2-5 seconds for the rig to 
>>>> go into transmit mode.
>>>>
>>>> I really doubt it is due to computer overload, as the only 
>>>> applications running are WSJT-X, MacLoggerDX (my logging program), 
>>>> and JT-Bridge  - all other applications have been ended. Since this 
>>>> happens when I press TUNE, that pretty much eliminates JT-Bridge 
>>>> and MacLoggerDX as the cause. Some hardware and software specifics:
>>>>
>>>> Mac mini, 32 GB RAM, 3GHz processor, 6 cores, Intel Core i5.
>>>> Mac OS Big Sur 11.5
>>>> WSJT-X 2.4.0
>>>> Audio Interface: Tascam US-125M external USB device
>>>> Values in the DT column are consistently about 0.1 - 0.4
>>>>
>>>> Wasn’t sure if I should post this here or on the WSJT-X list, but I 
>>>> thought I’d start here. Any ideas?
>>>>
>>>>
>>>> Jim / K7TXA
>>>> Eagle, ID
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wg9l at comcast.net