[Elecraft] K3 / WSJT-X Delayed Transmit

[David Olean]

Update the software to the latest. That was a known bug in earlier 
versions. I had the same problem with my K3.

Dave K1WHS

On 10/11/2021 1:31 PM, James Bennett via Elecraft wrote:
> Hi Folks,
>
> Wondering if someone on the list might be able to solve this one. I’m using a K3 and while CW is my main passion, I do dabble in FT8 occasionally. I’ve noticed that the radio does not start transmitting right at the start of the 15 second FT8 cycle. It will start anywhere from 2 - 5 seconds into the cycle. I can’t help but think that is not a good thing and could be the cause of an occasional missed QSO. I DO make QSOs but this kinda bothers me. The audio signals are delayed this amount of time, as is the red TX light coming on - I am using VOX . Same thing happens when I press the TUNE button - it takes anywhere from 2-5 seconds for the rig to go into transmit mode.
>
> I really doubt it is due to computer overload, as the only applications running are WSJT-X, MacLoggerDX (my logging program), and JT-Bridge  - all other applications have been ended. Since this happens when I press TUNE, that pretty much eliminates JT-Bridge and MacLoggerDX as the cause. Some hardware and software specifics:
>
> Mac mini, 32 GB RAM, 3GHz processor, 6 cores, Intel Core i5.
> Mac OS Big Sur 11.5
> WSJT-X 2.4.0
> Audio Interface: Tascam US-125M external USB device
> Values in the DT column are consistently about 0.1 - 0.4
>
> Wasn’t sure if I should post this here or on the WSJT-X list, but I thought I’d start here. Any ideas?
>
>
> Jim / K7TXA
> Eagle, ID
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k1whs at metrocast.net