[Elecraft] Elecraft Digest, Vol 210, Issue 5

[Bob McGraw]

One of the first clues to look for in regard to the audio level out of 
the computer being low is the PTT LED on the Signalink USB does not 
illuminate on transmit command from the software.

A second thing is to check the CODEC to see that the correct one is chosen.

If one has the PTT LED illuminating on the Signalink USB, you have the 
correct audio level and correct CODEC chosen from the computer.

73

Bob, K4TAX




On 10/7/2021 4:05 PM, elecraft-request at mailman.qth.net wrote:
> Message: 17
> Date: Thu, 7 Oct 2021 10:40:56 -0400
> From: Carter Craigie<carterwc128 at gmail.com>
> To: Elecraft List Members<elecraft at mailman.qth.net>
> Cc: Kay Craigie<kayn3kn at gmail.com>
> Subject: [Elecraft] K2 + WSJT transmit problem solved
> Message-ID:
> 	<CAOWp2qYKwO7CgPrnzyudaFpjEfBt8EUjhOib+vfxyAbrmFGs-g at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Thanks for the helpful suggestions about why my K2 would not go into
> transmit via my Signalink and various digital programs. It turned out that
> a sound setting in Windows was messed up so that audio from the computer
> was not getting to the Signalink.
>
> Took a screen shot of the setup so next time (and of course there will be a
> next time) maybe I can answer my own question.
>
> 73, Carter N3AO