[Elecraft] Not Able to hear CW

[John Stengrevics]

Unfortunately not that simple Andy.  When switching to CW mode, I tune around to make sure that it’s not a shift causing this .  But , no luck.

John
WA1EAZ

> On May 20, 2021, at 5:50 PM, Andy Durbin <a.durbin at msn.com> wrote:
> 
> "I can hear a 6 meter beacon on Data mode, but when I switch to CW I get no copy at all."
> 
> Does the K3, like the TS-590, have a user option that defines how the change to CW is handled?  The options are typically to keep the dial frequency the same and shift where the RX is listening, or to keep listening in the same place and shift the dial frequency.  In either case the shift is the chosen CW pitch.
> 
> 73,
> Andy, k3wyc
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jstengrevics at comcast.net