[Elecraft] Funny K4 Story

[Wayne Burdick]

This is correct.

Wayne


> On May 16, 2021, at 4:40 PM, Alan Bloom <n1al at sonic.net> wrote:
> 
> I believe the SWR meter in the transceiver is at the input of the internal tuner, not the output.  Since it always reads close to 1:1 when the tuner is engaged you may not notice if the antenna has a high SWR.
> 
> Alan N1AL
> 
> 
> On 5/16/2021 5:10 PM, Wayne Burdick wrote:
>> The K4 shows all four TX bar graphs simultaneously:  power, SWR, ALC, and compression. In addition you can select numeric display of power, SWR, supply voltage and current drain for the status area, which defaults to date/time.
>> 
>> Wayne
>> N6KR
>> 
>> ----
>> elecraft.com
>> 
>>> On May 16, 2021, at 12:18 PM, Ray <wa6vab at gmail.com> wrote:
>>> 
>>> My K3 has a SWR display next to the RF Power meter in the Display.
>>> So it Sounds like the K4 Does Not have that type of Display ?
>>> 
>>> WA6VAB  K3
>>> 
>>> 
>>>> On May 16, 2021, at 11:04 AM, Tom Doligalski via Elecraft <elecraft at mailman.qth.net> wrote:
>>>> 
>>>> ...
>>>> I normally would have noticed the change in SWR, and realized that I had an antenna problem. But, of course, I had tuned the K4 for the first time on 80M when I received it!
>>>> 
>>>> A learning moment (operator error?). Gonna try to check the antennas out a bit more frequently!
>>>> 
>>>> 73, Tom W4KX
>>>> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n6kr at elecraft.com