[Elecraft] K3 s/n 2274 update to new synthesizer board

[Don Wilhelm]

John,

Yes, there are lockwashers behind the board - when removing the old 
synth, do not initially remove the screws completely - loosen them until 
they are almost out, then tilt the board toward the rear and push the 
lockwashers up against the old synth board.
Now you can fully remove the screws without dropping the lockwashers 
(they will stay on the screws if you are careful)

73,
Don W3FPR

On 5/10/2021 10:54 AM, JOHN LAWRENCE via Elecraft wrote:
> Hi
> any hands on experiences detail that might be useful if I do it myself when the kit arrives.  Thanks
> John, W1QS
>
>
>