[Elecraft] KPA500-KAT500 tuning settings

[Alan - G4GNX]

AFAICR The KAT500 follows the K3, not the KPA500, as long as the Aux-bus 
cable is connected. I can certainly hear the relays click on the KAT500 
when I tune the K3 across a frequency threshold point.

73,

Alan. G4GNX


------ Original Message ------
From: pa2a at xs4all.nl
To: "elecraft at mailman.qth.net" <elecraft at mailman.qth.net>
Sent: 08/05/2021 12:59:03
Subject: [Elecraft] KPA500-KAT500 tuning settings

>Hi,
>
>if I switch the KPA500 with the band buttons to another band I would expect the KAT500 to follow the last tune settings on the new band. However this is not the case, the tuner switches to the new band settings only when HF goes through. The 15-p cable is connected and there is no K3 connected.
>Is there a menu setting to let the KAT500 follow the KPA500?
>
>73s Steef PA2A
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to g4gnx at g4gnx.com