[Elecraft] WSJTX settings

[Rick NK7I]

That depends on which logging program too, N1MM (and others) for example 
assumes control of the radio.  In those cases, they cannot be running if 
you want native WSJT-X to control the rig.

I use HRD for control and logging; within WSJT-X I have HRD set as the 
rig (so even if I switch to another radio, it still works too).  WSJT-X 
can also load directly into the logging program of HRD (if you use for 
example Win3K3 for rig control with HRD logging).  They all play nicely 
together.

73,
Rick NK7I


On 3/22/2021 9:21 AM, Bill Frantz wrote:
> Welcome to the list and to the K3.
>
> I had similar problems yesterday and it was something I am have 
> experienced before. I had a logging program running that uses the CAT 
> interface, and WSJT does not share well. Quitting the logging program 
> made things work again. My only problem is soreness from kicking 
> myself in the butt.
>
> 73 Bill AE6JV
>
> On 3/22/21 at 11:20 AM, ka4fox at gmail.com (Steve Fox) wrote:
>
>> First post from a new K3 owner.
>> Trying to get the CAT portion of WSJT working.  I’ll worry with the 
>> audio later. Have communicated with K3 via Utility on Com 4.
>>
>> On my PC I have WSJT set for K3, correct port, 38400, 8-1-none, CAT, 
>> Data/Pkt, split none. Is there a menu item somewhere on the K3 that I 
>> need to check and alter?  Mode is set to DATA.
> -----------------------------------------------------------------------
> Bill Frantz        | Privacy is dead, get over | Periwinkle
> (408)348-7900      | it.                       | 150 Rivermead Rd #235
> www.pwpconsult.com |    - Scott McNealy (1999) | Peterborough, NH 03458
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rick.nk7i at gmail.com