[Elecraft] best grounding technique

[Walter Underwood]

Personally, I would re-read the appropriate chapter in the ARRL Grounding and Bonding book. That explains the goal of bonding equipment and gives best practices. This book will be the best $23 you spend on grounding and bonding. I’ve already read it twice, but there is no way to remember the whole thing, so I always refer back to it.

https://www.arrl.org/shop/Grounding-and-Bonding-for-the-Radio-Amateur

wunder
K6WRU
Walter Underwood
CM87wj
http://observer.wunderwood.org/ (my blog)

> On Mar 19, 2021, at 2:06 PM, Robert G Strickland via Elecraft <elecraft at mailman.qth.net> wrote:
> 
> It seems that there are two ways of running grounding wires in the shack: FAN - from a common ground point, individual grounding wires are run to each piece of equipment; LINKING - a ground wire is run from each piece of equipment to the next and eventually ending in a common ground point. What's the group wisdom on the relative merits of these two approaches to running grounds in the shack?
> ...robert
> -- 
> Robert G Strickland, PhD ABPH - KE2WY
> rcrgs at verizon.net.usa
> Syracuse, New York, USA
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wunder at wunderwood.org